How To Install PP Compression Fitting?

  •  

    1
    Hold the center nut of a pp compression fitting with an adjustable wrench. Turn one of the two outer locking nuts counterclockwise with a second adjustable wrench. Turn the wrench until the outer locking nut is loose but do not take apart the fitting.

    2
    Slide an end of a piece of poly pipe into the loosened side of the compression fitting. Slide the pipe until you feel the pipe bottom-out inside the fitting. Turn the locking screw clockwise with the adjustable wrench until it is tight. A tight locknut does not allow the pipe to move in the fitting body.

    3
    Loosen the second locknut with the adjustable wrench. Slide the loose end of a second piece of pipe into the open side of the fitting. Turn the locknut clockwise to lock the second piece of tubing in the fitting body.

    The two piece of ball valve is also one of our products, welcome to your come and purchase!