How To Dismantle Planting Machine Parts

• Posted by luu hongxiang December 9, 2020 - Filed in Business - #Vegetable Planter  #Planting Machine  - 767 views
  1. Points to note when disassembling parts

  If it is out of repair for a long time, the parts of the Planting Machine may cause problems. Therefore, the Planting Machine must promptly replace the damaged parts. When disassembling and replacing parts, Planting Machine operators or maintenance personnel often overlook many details because disassembling parts is an easy task, which constitutes some unnecessary inconvenience and interferes with the service life of Planting Machine. When disassembling parts, you should use matching dismantling tools. Planting Machine hands cannot use other dismantling tools to disassemble parts that are not matched with them. This will cause damage to the parts and then damage. Planting Machine.

  1. Problems to pay attention to when using new parts

  After the parts of the Planting Machine are broken, they must be replaced. However, when disassembling and replacing parts, many repairers do not do a good job of checking them. This is wrong. Because new parts are likely to be stored for too long, resulting in performance changes, or improper storage during transportation, which constitutes the part If it is damaged, the Planting Machine hand or repairman must inspect it to avoid installing damaged parts.

  Matters needing attention during maintenance

  1. Points to note when saving Planting Machine

  Due to the seasonal nature of the use of Planting Machine, most of the year it is left unused at home. Therefore, the Planting Machine must be carefully maintained, and it must be placed in a dry and ventilated place, and it must not be exposed to the sun or rain.

  1. Clean up the Planting Machine after use

  After the Vegetable Planter is used, it must be thoroughly cleaned, such as impurities in the seed box and the seed meter. After the Vegetable Planter is cleaned, it should be dried and the related parts should be lubricated.

  1. Preparation before planting
  2. Before planting, check the condition of the plot carefully and be well aware of it to ensure the quality of the work and the safety of the machinery;
  3. The seeds need to be dry and clean, and should not be mixed with impurities such as stalks and stones to prevent clogging the seeding opening and disturbing the sowing quality. When precision sowing, the seeds need to be carefully selected and the fertilizer should be clean, otherwise it will interfere with the quality of sowing and fertilization;
  4. Put the seed and fertilizer in the proper place on the ground to prevent time delay when adding seeds and fertilizer.