Forums » News and Announcements
Oil Filters: What They Are, How They Work
-
Oil Filters: What They Are, How They Work, and Why They Matter
The oil filter is a crucial component in an automobile engine’s lubrication system. Its primary purpose is to capture impurities, dirt, dust, and sludge present in the oil, preventing them from circulating through the lubrication system and potentially damaging engine components.Get more news about filtro de aceite,you can vist our website!Function and Importance
Filtration Mechanism:
The oil filter operates based on a filtering medium that traps solid particles present in the oil. These particles can include combustion residues, dust, metallic oxides, and other impurities that accumulate within the engine.
By removing these contaminants, the oil filter ensures that only clean oil reaches critical engine parts, such as the crankshaft, which drives the intake and exhaust valves.
Regular Maintenance:
It’s essential to periodically check the oil filter’s condition and replace it if it’s dirty or damaged. Follow the manufacturer’s recommendations for regular filter changes.
Neglecting the oil filter can lead to reduced lubrication efficiency, increased wear on engine components, and potential engine damage.
Types of Oil Filters:
Depth Filters: The earliest oil filters were depth filters, invented in 1923. However, they were not very efficient, as they only filtered about 10% of the oil. The cleaned oil was returned to the oil pan, while the remaining 90% bypassed the filter.
Full-Flow Filters: In the 1950s, full-flow filters became popular. These filters pass all the oil received from the pump through a surface filter. This design significantly improved efficiency by thoroughly cleaning the lubricant, thus extending the engine’s lifespan.
Changing the Oil Filter:
To maintain optimal engine performance, follow these steps to change the oil filter:
Locate the Filter: The oil filter is typically near the engine block. Refer to your vehicle’s manual for its exact location.
Drain the Oil: Before removing the filter, drain the oil to prevent spills.
Remove the Old Filter: Use an oil filter wrench to unscrew the old filter. Be prepared for some oil spillage.
Install the New Filter: Apply a thin layer of fresh oil to the rubber gasket on the new filter. Screw it onto the filter housing.
Refill with Oil: Add the recommended amount of fresh oil to the engine.
Start the Engine: Run the engine for a few minutes to circulate the new oil.
Check for Leaks: Inspect for any oil leaks around the filter and oil pan.
Dispose of the Old Filter Properly: Take the used filter to a recycling center or an auto parts store that accepts them.