Hydraulic Vehicle Positioning Bottle Jack Could Be A Good Tool

• Posted by Ming rui August 31, 2021 - Filed in Arts & Culture - #hydraulic vehicle positioning jacks long ram jacks  - 572 views

   

  Park your vehicle on a level ground. If you are near a garage, take the car there. But if it’s an emergency, find a level ground near you. Ensure that you have put on the parking brakes to prevent the vehicle from toppling the equipment and the crashing.

  Chock the wheels to prevent the car from rolling back. Place a chock in front of all the wheels at the opposite end. You can also use wedge-shaped pieces of wood, rocks, or bricks in place of chocks.

  Find the jack point of your car. There are several jack points in most cars. Failure to place the equipment at a jack point can lead to damages. Use the car manual to identify the jack points. In most vehicles, the jack points are located behind the front wheels or in front of the rear wheels. If you do not have a user manual, you can look at flat metal areas which usually resemble the top of a bottle jack. Some cars have jack points labeled as jack.

  Once you have located the jack points, place the bottle jack under them. The tool does not need to be perfectly lined up with a jack point. Ensure that it’s the right side of the jack that is facing up. If you are uncertain about the side that should face up, look at the jack carefully. Some of the bottle jacks have a side labeled this side up.

  
  Insert the lever into the hydraulic vehicle positioning jacks and pump it until the saddle is close to the vehicle. You can make some adjustments at this point. Pump the bottle jack slowly until the vehicle is high enough from the ground for you to work on it.

  Lower the car slowly when you are done and remove the bottle jack.
  We have also discussed different accessories that you can use to make the lifting process safer and more efficient. If you expect to lift on soft ground then you may want to invest in a base plate to give you a more stable base when performing a lift.

  We are one of the long ram jacks manufacturer and welcome to your come and purchase!