The plastic bucket heat transfer machine is a very popular thermal transfer transfer equipment. We often encounter many problems when using it. Let us take a look at what should we do if we encounter these situations?
Scenario 1: Overprinted dark streaks in the image printed by the thermal transfer machine
The reasons for this situation are:
1. The ink head of the digital thermal transfer machine is offset, the single ink head has an oblique offset, and the two ink heads are not aligned;
2. The paper feeder jammed too tightly, resulting in poor paper feeding, causing a large resistance to the Y-axis stepping motor, and failing to reach the standard step value;
3. There are differences in the stepping amount when feeding paper of different thicknesses.
The corresponding solution can be:
1. To calibrate the print head, please contact a professional technician for handling;
2, manual paper is used to reduce resistance;
3, the nozzle is disconnected to clean the nozzle;
4. If the amount of printing ink is not enough, you can increase the amount of ink;
5. If the paper feeder is too tight, you can try to relax the paper feeder.
Situation 2: Thermal transfer machine dripping ink
In this case, our solutions are:
1. The temperature is too low to increase the ambient temperature;
2, the nozzle is not cleaned and clean the nozzle again;
3, the pipe or ink sac is ruptured to replace the pipe or ink sac;、
4. Add too much ink and the amount of ink does not exceed the ink.
We have transfer paper wholesale and welcome to your come and purchase!