Emergency Light Manufacturers-Emergency Light Battery Voltage

• Posted by Bert linsheng April 21, 2020 - Filed in Business - #Emergency Light  - 1,657 views

   

  The batteries used in emergency lights also have a variety of voltages, from 6 VDC to 24 VDC. Higher voltage allows connecting brighter lights to emergency lights. In cases where remote light heads need to be connected to emergency light units, they can also work better, because there will be less voltage loss over the entire line distance. Finally, higher voltage batteries also allow the use of higher wattage bulbs, which increases light intensity.

  The     Emergency Light Manufacturers    stated that when replacing batteries in an emergency, it is important to ensure that the same battery voltage and the same battery type are installed. Too high voltage will burn out the bulb, and too low voltage will cause the bulb to dim. In addition, if the battery voltage and the circuit card voltage are different, the battery will not charge properly.

  The battery is an important component of emergency lighting fixtures, not the lighting itself. Safely protect the interior of the unit. This is the method of providing emergency lighting with adequate lighting to find the way to the nearest exit when the house power is cut off.

  Before replacing the emergency light battery, make sure to first write down the type, voltage and amperage of the old battery. The standard internal power supply for most lamps is sealed lead acid and nickel cadmium, with very few exceptions. Sealed lead-acid batteries have been used for more than 30 years, although nickel-cadmium batteries can quickly replace lead due to their long life and compact size.

  
  Emergency light batteries come in various shapes and sizes. The 6-volt 4.5-amp sealed lead-acid battery is one of the most common models in emergency lighting equipment.

   

  If the correct battery is not installed, the emergency light will not work properly in the event of loss of AC power, such as fire, earthquake or other conditions. The OSHA (Occupational Safety and Health Administration) guidelines require regular preventive maintenance to ensure that the equipment can work properly during a power outage.

  Emergency light battery:
  Power supply lamp head in emergency
  Must last at least 90 minutes
  Reasonable price and easy replacement
  Provide different voltage and amperage
  Tested monthly and yearly according to OSHA regulations
  The battery test button is standard on all emergency lights. By pressing the test button, the emergency light unit is switched from AC power to emergency battery power so that you can clearly see the remaining power.

  
  Fully charged batteries are in good condition, and emergency lights should be powered for at least 90 minutes in accordance with UL (Underwriters Laboratories) requirements. If the battery cannot last for 90 minutes, the battery must be replaced. The UL 924 list is only available on batteries that meet or exceed UL's stringent testing procedures.

  Many of today's emergency lighting fixtures are equipped with self-checking options that enable the device to be automatically inspected monthly and yearly, thereby reducing maintenance requirements and improving the efficiency of building emergency lighting systems.

   

  Linsheng is a professional emergency light manufacturer and emergency light supplier in China that produces emergency lights and emergency light batteries. Can meet the different needs of customers, we can quickly provide goods, have our own laboratory and the industry's most advanced testing equipment to ensure product quality. Our products have been sold worldwide. Our products have passed "CE, GS, UL and other certifications". We sincerely welcome to cooperate with our factory.  https://www.linsheng.com/