Noise Reduction Of Performance Built Log Splitter
-
Performance Built Log Splitter is a kind of wood chip processing machinery and equipment, which is our company's main product. This equipment is mainly cut by blades. It can break wood and other materials into small wood chips with a standard 3-5cm scale and break them into wood chips. It has extensive use value in forestry, chemical industry and paper industry.
The wood chip machine will produce a certain amount of noise when it is in use, and this question is not unsolvable. Although the noise cannot be completely disappeared, it can reduce the impact of noise to a certain extent. Detailed implementation status:- During the processing of wood chips, after being cut, the material will bounce and hit the inner wall of the machine, and a lot of noise will be generated. This can be handled by adding wear-resistant liners.
- Add damping material to cover the frame shell on the transmission surface of the material plate and the feed inlet, which can reduce the large noise radiation surface.
- When the chipper is working, the feeding speed cannot be too slow or too fast. If the feeding is too slow, the noise will be greater. If the feeding is too fast, the load of the machine will increase, and the decrease in the production speed will also increase the wear of the machine blade.
- In order to reduce the noise of the chipper more, we should maintain and maintain it frequently. The bearings of the machine are often filled with oil. The reduction of noise can also increase the service life of the machine.
- Carefully balance the rotating parts of the Log Splitter. Each device is calibrated and balanced before leaving the factory, and then the gap between the tapered bushing and the eccentric shaft is reduced to reduce the vibration intensity.