The Role Of Rapid Splitter Lubrication
-
After Log Splitter is used for a period of time, the mechanical parts will be worn out. At this time, it needs to be lubricated in time. If lubrication and maintenance are not done, it is easy to affect the subsequent use of the machine. Attention should be paid to the correct mastery of the method. Let’s introduce its lubrication work to you.
1. The bearings of Log Splitter are usually oiled with a butter cup, about every 40-60min. Thick oil is used to drip into the elbow of the thrust plate, usually every 3-4h.
2. If the oil pump suddenly fails during the lubrication process, and the equipment needs 15-20min to stop due to the large swinging force, then the oil pump must be manually pressed to keep the bearing lubricated and the bearing will not be burnt.
3. Before the equipment is started, grease must be added to the contact between the toggle plate and the toggle plate pad; the lubricating oil added to the bearing housing should be 50-70% of the volume, and be replaced every 3 to 6 months. When replacing the grease, clean gasoline or kerosene carefully to clean the raceway of the bearing. When cleaning, open the oil drain hole under the bearing seat and clean all parts before replacing it with new lubricant.
4. In winter, thin oil can be added to the lubricating oil to avoid solidification of the lubricating oil. After the lubricating oil is added, the sealing work must be done to prevent dust from entering to avoid affecting the lubrication effect. Pay attention to the oil temperature of the lubricating oil when working in the Log Splitter. The oil temperature should not be too high and should be controlled below 60 degrees.
5. Frequent attention and timely lubrication of the friction surface can ensure the normal operation of the machine and extend the service life of the machine. In the production process, add appropriate amount of grease every 400 hours of work; every 2000 hours of work, open the spindle assembly to clean the bearings; replace new bearings every 7200 hours of work.
Regular lubrication is helpful to the continuous operation of Rapid Splitter, which not only improves our work efficiency, but also greatly extends the service life of the machine. Pay attention to the correct mastery of the method during the lubrication process, and the lubrication of each part Work must be done to add lubricating oil reasonably to ensure that the subsequent use of the machine can be more efficient.