How The Log Splitter Is More Wear-resistant
-
Rapid Splitter has brought us convenience and contributed economic benefits to our economic development. For a company, having a wood chip machine means having wealth. Wouldn’t it be great if we had mastered the wear resistance skills of the wood chip machine? So we must learn more about the wear-resistant skills of the wood chip machine. The wood chip machine's knives must be sprayed well. Spraying the wood chip machine's knives is a good way to extend the service life. For example, electroplating is a traditional material protection method. The applicability of electroplating is very strong, and it is not limited by the size and batch of the workpiece, and it can protect the cutting tools of the wood chip machine. There is also the use of thermal spray technology. Thermal spray technology uses gas, liquid fuel, etc. as a heat source to atomize, spray, and deposit on the surface of the pretreated workpiece through high-speed airflow to form a method of firmly attaching to the surface of the tool. Secondly, the wood chip machine must be maintained before work. The newly installed wheel tyres are prone to looseness and must be checked frequently. Pay attention to whether all parts of the machine are working properly. Pay attention to check the degree of wear of easily worn parts, and pay attention to replacing worn parts at any time. On the plane of the bottom frame of the movable device, dust and other objects should be removed to prevent the movable bearing from moving on the bottom frame when the machine encounters unbreakable materials, which may cause serious accidents. After the wood chip machine is finished, the maintenance work is also to enhance the wear resistance. After the wood chip machine is completed, the waste wood must be cleaned to prevent the debris from staying in the wood chip machine. One is to affect the next work process, and the other is It can damage the machine. The wood chip machine can't work for a long time, and it must be stopped and rested. In fact, it is to extend the service life of the wood chip machine. There are many ways to enhance the wear resistance of the wood chip machine. We just learned these briefly. More knowledge of the Log Splitter will be discussed together with you. Ok, I understand.