Forums » News and Announcements
Tips and tricks for downloading 3D models
-
Tips and tricks for downloading 3D models
We provide the CAD data on our website for you through the CADENAS platform. Due to the variety of our products, we offer only a selected range on the corresponding detailed article pages with CAD data that can be directly called up. If you need a 3D model from outside of this range, you can assemble it using product-specific characteristics. There are therefore two different procedures to obtain your 3D model.To get more news about cad tips and tricks, you can visit shine news official website.
Finding the 3D model using the identification number:
✓ Check first whether a CAD model is offered on the detailed article page of the article you have selected. The model can be called up via the “Open CAD model” button. We will explain the procedure in detail here.
Filtering 3D models using product-specific characteristics:
✓ No CAD model is integrated into the detailed article page of the desired product? The 3D model for the article is therefore not immediately available for download. In this case, the 3D model can be filtered using the product-specific characteristics. You can find tips and tricks for this here.
We are working continuously to expand the available 3D models. Our colleagues in technical sales are happy to help you with any questions.
First enter the identification number into the search bar and select the product in the search results.
Check in the image overview below the product photo whether a CAD model is available.
If it is, select the “Open CAD model” button.
Is a CAD model available for the article? We will explain the next individual steps using an example. Let’s assume that you would like to download a 3D model in STEP format for the Bürkert 2/2-way solenoid valve type 6281 with identification number 221858. You can then follow the instructions step by step to finish the download of the 3D model:
If there is no 3D model directly assigned to your desired identification number, no CAD model button is displayed on the detailed page of the article.
In this case, we offer an alternative option to assemble your 3D CAD model yourself using product-specific characteristics.
Before you get started, you should have the following ready:
✓ Relevant type number for the selected article
✓ Product-specific data for the article
It is best to use an example to explain the procedure here too. Let’s assume that you need a 3D model of the Bürkert 2/2-way solenoid valve type 6027. In this case, enter the type number of the product in the search bar of the Bürkert website. Each Bürkert identification number is assigned to a type. If you do not know the type number, you can find this on the type label of your Bürkert product or by entering the identification number on the website: