Forums » News and Announcements

• freeamfva jack

  

  • 3204 posts
   

  March 27, 2023 6:27 AM EDT

  Injection compression moulding for the packaging industry

  The trend towards wall thickness reduction poses new challenges for companies in the packaging industry. For example, the margarine tub shown here has a wall thickness of only 0.4 mm and a flow-path-to-wall-thickness ratio of about 1:400. This means extreme demands on injection moulding production.Get more news about compression moulding machine,you can vist our website!

  For many applications starting at a ratio of 1:300, a consistently high part quality can only be achieved with the ENGEL coinmelt process (injection compression moulding). Further advantages of this technology:
  Thanks to the electrically driven clamping unit and its toggle lever design, the ENGEL e-speed injection moulding machine allows very fast and, above all, precise, short compression strokes - in this case, short means 3 mm. The parallel movements of the clamping and injection sides can be precisely controlled.

  This precise synchronisation of the compression stroke and injection profile makes it possible to combine ENGEL coinmelt technology with a stack mould, enormously expanding the range of applications for injection compression moulding.
  Recovering energy with the e-speed
  With the new e-speed 420 size with 4200 kN clamping force, ENGEL is further diversifying its product range in order to tailor the injection moulding machines and system solutions, even more precisely to the respective application in terms of maximum overall efficiency. The injection moulding machine combines:

  The innovative energy recovery system of the e-speed collects the braking energy of the platen movements. It then releases the stored energy back to the motor when the platens start to move again.

  The toggle lever is encapsulated. This ensures a particularly low lubricant requirement and meets the highest cleanliness demands. Therefore, the machines of the e-speed series meet the strict requirements of the food industry.

  Picture shows the hybrid high-performance injection moulding machine e-speed from ENGEL
  The e-speed is the hybrid high-performance injection moulding machine for the most challenging applications in the packaging sector.
  System solutions for a successful circular economy
  Mono-material packaging, like the margarine tub in our example, consists of the same material throughout, including the label. Therefore the tub, can be shredded at the end of its life, and the recyclates moulded into new products.

  ENGEL is one of the pioneers in the development of a circular economy for the plastics industry. As a result, the plastic content of many products produced on our customers’ injection moulding machines consists of one hundred percent recycled material.

  For example, die-cutting scrap, such as those resulting from label production for this margarine tub, are regranulated and processed into new injection moulded products on an ENGEL victory injection moulding machine.

  This establishes a process chain in the sense of a circular economy - an essential contribution to sustainability in production.