Some safes are equipped with a mechanical safe lock where you need to turn a dial to enter your code. Changing the code on this type of lock can be a little tricky because you’ll need your lock’s change key. If you have lost your key or never had one to begin with, you’ll need to contact your safe dealer for assistance or have a reputable locksmith change the code for you.To get more news about smart door lock manufacturers, you can visit securamsys.com official website.
Your safe’s owner’s manual should provide detailed instructions on how to change your dial lock’s combination. Don’t attempt to do a change on your own unless you are confident you know what you are doing. It’s often better to consult with a professional first. If you do decide to change your combination, make sure you do it with your safe door open so that you don’t end up being locked out of your safe if you make a mistake.
The process to change the combination on a digital/electronic safe lock is simple in comparison to a mechanical lock. If you have purchased a safe from Liberty Safe equipped with a SecuRam electronic lock, you have likely gone through the code changing procedure when your safe first arrived.
To change your combination code with the SecuRam TopLit or BackLit models, you’d simply:
Press the “0” key six times (you will then hear two beeps)
Enter your existing six-digit code (you should then hear two beeps)
Enter your new six-digit code (you will hear one beep)
Re-enter your new six-digit code (you will hear one more beep)
That’s all there is to changing your combination code if you have one of those safe locks! And if you have a ProLogic L01 electronic safe lock, the process is made even simpler because the display screen will walk you through the entire process; just make sure that you have your Super Code or Manager Code available.
If you're shopping for a safe or your existing safe is equipped with a mechanical lock, upgrading to an electronic lock will make changing your combination a snap.