Forums » News and Announcements

A Comprehensive Guide to Plywood Flooring

    • 1841 posts
    September 7, 2022 10:30 PM EDT

    A Comprehensive Guide to Plywood Flooring

    Years ago, plywood in floors was limited to sheathing and underlays. Nowadays, it’s utilised as a cost-effective flooring finish as well. Thanks to technological improvements, plywood flooring is now a viable alternative to most other floors. It offers a durable and more affordable solution for many construction projects.To get more news about commercial plywood, you can visit official website.

    Tip: Make sure your people inspect each plywood sheet for voids between veneers that are visible along the edges. These indicate structural flaws that become visible only when the sheet is cut.
    Plywood is a composite building material. It’s made of several thin sheets of wood veneer or “plies.” These are produced by a machine that rotates harvested wood logs and peels them off.

    Each veneer sheet or ply is first rotated to a different angle before bonded to another sheet with strong adhesive. Then it’s all compressed under heat into a much denser material.

    That method creates what’s called “cross-graining.” By compressing veneers in different angles, plywood manufacturers can reinforce the material with wood grains that run perpendicular to one another. This reduces the plywood’s tendency to split, warp, expand, or contract.

    Moreover, plywood manufacturers often use better-quality veneers for the outer layers. The lower-quality inner layers create a separation between the outer layers on each side of the panel. If any stress strikes one outer layer, less of the force gets transferred to the other side. This makes plywood even more resistant to bending. Plywood for subflooring usually comes in interlocking sheets (i.e., with interlocking tongues and grooves). When installed directly on top of the joists of a floor’s framing system, it forms a secure base for the finished floor layer that will be laid on top of it.

    Depending on what kind of floor you’re creating, you may need an underlayment on top of the subfloor. This optional layer provides a stiffer, smoother surface for the final top layer to rest on. It can also act as an extra moisture or sound barrier. For this, you can use plywood as well.

    You can install plywood as the finish or “covering” on top of an existing subfloor. (And yes, you can have plywood flooring over a plywood subfloor.)

    You can cut plywood into planks or special shapes and lay them in whatever pattern you prefer. Some plywood flooring designs even mimic traditional wood parquet floors or mosaics.