Flange Insulation Gasket Kit Reduces The Corrosion In Exotic Me

• Posted by xinjia shaoxing March 9, 2021 - Filed in Farming - #Kammprofile Gaskets Suppliers，Flange Insulation Gasket Kit  - 1,071 views

  　   Due to its unique pressure-activated sealing mechanism, the gasket requires less bolt stress than any other gasket to seal. The inner diameter of the VCS washer is fully matched to the flange hole to eliminate turbulence and flange corrosion/corrosion. Sealing elements can be replaced in a reusable gasket holder.

  　　Features and advantages

  　　Extremely reliable seal and insulation suitable for all key services

  　　Sealed and insulated from all pressures through ANSI 2500 # and API 10,000 #

  　　Belt harsh service conditions, including large bending moments, vibration, temperature, and pressure cycles

  　　Withstand the corrosive environment, including high concentrations of CO2, H2S, water, etc.

  　　Excellent isolation performance can achieve cathode protection, vascular corrosion, and other pipeline system isolation requirements

  　　Activate pressure to achieve reliable sealing and eliminate expensive leaks

  　　Precisely set the size of the hole to protect the flange and prevent turbulence of the flange connection to reduce corrosion caused by the corrosion and flow caused by the medium.

  　　Eliminate the corrosion caused by microorganisms (MIC)

  　　Alleviate the electrocortical corrosion in xenograft

  　　Flange Insulation Gasket Kit (sleeve and gasket) always include high-strength dual washers and full-length casing to maximize short circuit

  　　High-strength laminates can resist failures caused by over-compression (e.g., over-tightening bolts)

  　　The spring-powered PTFE seal can provide a radial load and sealed in a sealing groove to eliminate cold flow.

  　　Match any flange specification (ANSI, API, BS, DIN, AS, etc.)

  　　RTJ flanges that can not match the raised flange seal

  　　Can be reused

  　　Easy to install, assemble, and disassemble the sturdy structure helps to install. The required bolt load is low. The tightening force required is small, thereby reducing the flange and bolt stress. Self-alignment and centering do not require special tools.

  　　The serial seal version is 6 inches and above, and standardizes 24 inches - accessible information about other sizes, please contact Kammprofile Gaskets Suppliers.

  　　Note: Electrical values ​​are based on laboratory conditions samples under laboratory conditions. Exposure to change the value at moisture or high temperature.